Feeding Bottle Steam Sterilizer

Product Description

Product Name: Feeding Bottle Steam Sterilizer
Model No.: FBS-2

Products Detail:
Before each use
1. Before sterilizing, wash all items in mild soapy warter and rinse.
2. Pour exactly 90ml of water into the sterilizer body. If you add more than 90ml you will prolong the cycle time. If you use less then 90ml, your items may not be properly sterilized. Check the water dose not exceed the "max" lina.

To sterilize up to six bottles
1. Slide fhe fower basket onto the central stem.
2. Tread 2 screw rings, into the central stem.
3. Slide the bottle rack down the central stem.
With the neck facing down, until it rests on the top screw ring.
4. Place the teats through the center of the holes, in the bottle rack onto the lower basket.
5. Tnread 4 screw rings onto the central stem.
6. Place the 6 inverted bottles in the bottle rack.
7. Push the upper basket onto the central stem until it rests on the catch. Place the 6 dome caps and tongs into the upper basket.
8. The upper basket is not required when sterilizing 330ml bottles.
9. Place the assembled unit into the sterilizer body and put the lid on.
10. Put the lead into the back of the sterilizer body and plug into the mains supply. Switch on.
11. Cycle times will vary depending on the load. After each cycle the unit will switch off automatically and the light will go out (approx cycle time: 8 minutes)

To sterilize the breast pump
1. Click the breast pump body into the slot in the upper basket and arrange the other breast pump components as shown. Assemble remaining components of the breast pump in the lower basket.
2. Up to six bottles not including screw rings, teats or dome caps) can be sterilized with the pump.
3. Place assembled unit, into the sterilizer body and plug into the mains supply. Switch on.